Painting exterior walls can result in the best outcomes when the right steps are followed. People who love to maintain their home and do the job by themselves will surely enjoy painting exterior walls. They will experience a fun day scraping, sanding and preparing the walls before they will climb ladders and mix paint. Here is the step by step process in painting exterior walls.
Scrape the Walls
The exterior walls where you can find chipping old paint should be scraped so that the peeling paint will be removed. Seal the crevices and cracks with spackling compound or painter's caulk. Then, sand the walls using 100-grit sandpaper until you will be able to achieve smoothness on the wood.
Use Mild Soap and Water to Wash the House
You can make use of a pressure sprayer in washing the house; however, you have to be sure that you don't dig grooves into your wood. Rinse off the soap and allow the wood to dry totally.
Apply Primer Coats
You can apply as many primer coasts as you necessary using a wide brush. You need to follow the instructions given by the manufacturer.
Apply the Pain
In applying the paint, you have to start from the top down starting at your fascia boards and eaves. The whole fascia and eaves perimeter must be painted before you start on your walls.
Start the Wall Painting
Begin with a wall area from the top with the use of long horizontal strokes with your brush. Begin in a spot which doesn't have paint on it and apply the paint toward the area that you just painted. This process should be repeated until you have applied the first coat. Always follow the instructions of the manufacturer on the next coats.
In painting exterior walls, it is necessary to wear safety glasses all the time. You can also wear something to protect your lungs when you sand the walls. Let the spackling compound or painter's caulk dry totally before you start sanding. This will make sure that there will be a great covering around your trim. When you have poured paint into a bucket, make sure that the paint's lid can be sealed tightly. You can drive a 6d finish nail and make holes around the paint's rim will assure proper seating of the lid which will preserve your paint in the end. Finally, it is not a good idea to stroke until your brush will be out of paint because this can result in uneven coats.
For more effective ways of coating the walls of your house, you may visit Exterior Wall Coatings Skipton office near you.
Article Source: http://EzineArticles.com/?expert=Jessie_Reyes
